Your current location : Home >> News >> company news

Contact Us

Dengta Huatao Mining Co., Ltd.

Contact: Manager Zhang

Mobile: 13941993697

Contact: Manager Zhu

Mobile: 13841904588

Website: www.dthtky.com

Website: en.dthtky.cn

Address: Shanggangyao Village, Xidayao Town, Dengta City, Liaoning Province


Analysis of Causes of Calcination Zone Movement in Active Lime Kiln

2019-12-20
Times

In the calcination production of the active lime factory kiln, the location and temperature of the calcination zone is the key to affecting the calcination quality of the material. Many times, in the high-temperature calcination operation, due to various factors, the position of the calcination zone of the active lime kiln will move or become shorter, which will greatly affect the calcination operation. However, if we want to solve the problem fundamentally, we must find the cause and avoid it effectively, in order to completely solve this problem. Today, the editor of Qianbaidu combined with some of our practical experience to give you details Analyze the reasons for the movement of the calcination zone of the active lime kiln so that everyone can fundamentally solve the problem. Active lime manufacturers


1. Moisture of calcined materials.


When the active lime kiln is calcining the lime material, if the moisture contained in the active lime material is too large, after entering from the kiln tail, a large amount of heat is required to pre-heat it. In this case, the temperature of the kiln tail of the active lime kiln will inevitably decrease, resulting in an increase in the length of the preheat zone, and eventually the position of the calcination zone of the active lime kiln will move forward or become shorter.

thumb_20180815152330_636.jpg

In the calcination production of the active lime factory kiln, the location and temperature of the calcination zone is the key to affecting the calcination quality of the material. Many times, in the high-temperature calcination operation, due to various factors, the position of the calcination zone of the active lime kiln will move or become shorter, which will greatly affect the calcination operation. However, if we want to solve the problem fundamentally, we must find the cause and avoid it effectively, in order to completely solve this problem. Today, the editor of Qianbaidu combined with some of our practical experience to give you details Analyze the reasons for the movement of the calcination zone of the active lime kiln so that everyone can fundamentally solve the problem. Active lime manufacturers


1. Moisture of calcined materials.


When the active lime kiln is calcining the lime material, if the moisture contained in the active lime material is too large, after entering from the kiln tail, a large amount of heat is required to pre-heat it. In this case, the temperature of the kiln tail of the active lime kiln will inevitably decrease, resulting in an increase in the length of the preheat zone, and eventually the position of the calcination zone of the active lime kiln will move forward or become shorter.


label

Recently Viewed:

Related Products

Related news